Industrial Gas Burner Suppliers

  KTP [kW 320 ÷ 33.500] These industrial burner have been designed for all those application in which singleblock model’s are, for whatever   reason, unsuitable. For example, when the requested output requires the use of a too large built-in fan motors, whenever   hot combustion air is provided, or again, whenever the primary noise source must be moved to soundproofed areas. The range goes from 320 KW to 33.5 MW in different constructive version as required by the specific clients   requirement. Aluminium casting usually used for the lower power model (up to 19 MW), while steel construction is use for   higher power models. This industrial burner design project was developed to obtain the greatest versatility in order to   achieve customers targets, and compliance to the widest range of technical specifications. For example, combustion heads with air inlet coming from above or below, axial or tangential air flow, registers for   turbulence adjustment, ...

Smart and efficient combustion   CIB UNIGAS S.p.A. can provide small and medium size burners (up to 2.050 KW) with an electronic control system. They can be used both on single fuel burners (gas or light oil) and on dual fuel burners (gas/light oil). WITH LMV 2… MICRO PROCESSOR EA  Medium-small burners complete with electronic cam EB  Medium & small burners complete with electronic (cam and inverter) EC  Medium & small dual fuel burners complete with electronic cam. ED  Medium & small dual fuel burner completer with electronics cam and inverter. Types of controllers & Servo motor: LME20, LMV26, LMV37, LMV51, LMV52, SQN14, SQM33 This system offers many features: Reduction of mechanical moving parts Built-in flame detection box Integrated gas proving system Possibility to install different types of flame sensors, so That the electronic cam system can be used on all applications Variable speed drive VSD (only on certain versions) Error-code display ...

Ours burner (Gas or Oil Fired Burners) are equipped with the most modern automatic’s mechanical or electronics modulation systems which allow the correct fuel/air ratio. In this way, the BURNER thermal load can be adapted with precision to the heat required at every moment of the operation, thus optimizing the performance. The electronic modulation system makes perfect use of the fuel/combustion air curve, which proves to be wider than the curve obtained by the mechanical modulation system.   All Monoblock burners are equipped with a fan motors or a separate’s motor for the operations of the light/heavy oil fuel pump through a flexible coupling. The control panel is completed with an electronic control box (Burner Controller) and with a Flame sensors (i.e. Photcell, UV Sensor, Ionization rod etc..) . The control logic is incorporated into a Burner Control Box. The atomisation’s and fuel supply system include Spray nozzles, ignition electrode, Ignition transformers, flexible hose a...